Table of content
- Which certification actually applies to you
- ISO 9712: the third-party scheme
- SNT-TC-1A and CP-189: the US employer-based schemes
- NAS 410 and EN 4179, in brief
- Cross-scheme comparison
- What it actually costs
- Certification in India
- Which scheme for which career path
- Key takeaways
- FAQs
- References
- Further reading
Which certification actually applies to you
NDT certification isn’t one system — it’s several, and which one governs your career depends on your industry and country, not just your skill level. This guide compares the three schemes a working technician is most likely to run into: ISO 9712 (third-party, dominant outside the US), SNT-TC-1A (employer-based, dominant in US general industry), and NAS 410/EN 4179 (employer-based, aerospace-specific). For NAS 410/EN 4179’s own mechanics in depth — levels, training hours, exam structure — see the companion article, NAS 410 and EN 4179 Certification Explained; for aerospace NDT method selection generally, see Aerospace NDT: Methods, Standards and Certification. This guide stays focused on the broader question: which scheme, which industry, which country, and what it actually costs.
ISO 9712: the third-party scheme
ISO 9712 (“Non-destructive testing — Qualification and certification of NDT personnel”) is a third-party scheme: an independent certification body, not the employer, certifies the individual — and under the best-documented national implementation, the UK’s PCN scheme, the certifying body (BINDT), the trainer and the examining body are kept distinct.
Levels (per the PCN General document, which implements ISO 9712):
- Level 1 — performs NDT to written instructions under supervision; sets up equipment, performs tests, records and reports results; does not select the method or interpret results independently.
- Level 2 — performs NDT to procedures; selects techniques, defines limitations, writes instructions, interprets results, supervises Level 1.
- Level 3 — directs NDT operations, validates procedures, interprets standards, may manage exams; initial Level 3 candidates must already hold Level 2 or pass the Level 2 practical.
Methods covered under PCN/ISO 9712 include ET, MT, PT, RT, UT, ACFM, VT and RI (Level 2/3 only), plus techniques such as phased array, TOFD and TFM.
Training and experience minimums vary by method. Example day-based training minimums (Level 1/2/3): eddy current 5/6/6, magnetic particle 3/2/4, penetrant 3/2/3, radiography 5/10/5, ultrasonic 8/10/5. Experience minimums for volumetric methods run roughly 45 days (L1) up to 270–540 days (L3); for surface methods, roughly 15 days (L1) up to 180–360 days (L3). These day-figures are drawn from the UK PCN scheme’s own general document — ISO 9712 itself is implemented somewhat differently by different national certification bodies, so treat PCN’s figures as a well-documented example rather than a single universal number across every country.
Renewal: under PCN, certificates can be renewed without exam up to 5 years after the last passed exam; recertification by exam then cycles at 5 or 10 years depending on certificate type. Renewal applications are due no sooner than 6 months and no later than 6 weeks before expiry.
Geographic reach: ISO 9712 or ISO 9712-derived schemes are the national scheme (or a major alternative) in the UK, Germany, France, Austria, and much of Europe; Australia, China, India (via ISNT), Japan (a modified version, JIS Z 2305), Singapore and Vietnam; Israel and parts of Southern Africa; and the US, where ASNT’s ACCP/ASNT9712 program adopts ISO 9712 as a third-party alternative alongside SNT-TC-1A.
SNT-TC-1A and CP-189: the US employer-based schemes
SNT-TC-1A is an ASNT “Recommended Practice” — a guidance document, not a mandatory standard. It’s employer-based: the employer is the certifying authority, and ASNT has no audit function over how it’s applied. It’s used heavily across general industry — oil and gas, transportation, power plants, construction, bridge fabrication and inspection — rather than being aerospace-specific.
Three levels (I, II, III), with internal, employer-granted Level III permitted. Training-hour recommendations are method-specific and generally run lower than comparable ISO 9712 or AWS figures — for example, ISO 9712’s Level II radiography requirement is around 164 training hours versus roughly 80 under SNT-TC-1A. Because it’s a recommended practice rather than a mandatory standard, employers have latitude to tailor their own Written Practice, and SNT-TC-1A’s published hour minimums for some methods run noticeably lower than comparable AWS or ISO 9712 figures.
CP-189 is the stricter sibling: an ANSI/ASNT American National (consensus) Standard, not a recommended practice. Once a contract, code or spec invokes CP-189, its minimum training/experience hours become mandatory and employers cannot reduce them. CP-189 defines five levels (trainee, I, II, III, instructor), requires a Level III to administer and approve exams with documented records, and sets recertification at a hard maximum of 5 years, requiring re-examination or another documented written-practice provision — not experience alone.
Both remain employer-based — neither replaces the employer’s own certifying role with a central ASNT authority.
A nuance worth noting: ASNT also separately offers a true third-party, ISO-9712-based personal certification in the US — ASNT9712 (under ANSI/ASNT CP-106/ACCP) — distinct from employer-based SNT-TC-1A. The US NDT landscape isn’t purely employer-based; both models coexist.
NAS 410 and EN 4179, in brief
NAS 410 (US, via AIA/Accuris) and EN 4179 (Europe, harmonized) are aerospace-specific, employer-based schemes: the employer’s own Level 3 certifies its personnel, rather than an independent third-party body. Certification generally doesn’t transfer between employers. For the full breakdown of levels, training hours, exam structure and recent updates (NAS 410 Revision 6, EN 4179:2026), see the companion article linked above — this guide doesn’t repeat that depth.
Cross-scheme comparison
ISO 9712 | SNT-TC-1A | CP-189 | NAS 410 / EN 4179 | |
|---|---|---|---|---|
Certifying authority | Third-party, independent certification body (e.g., BINDT under PCN) | Employer-based; ASNT has no audit role | Employer-based, but ASNT’s own consensus standard sets mandatory minimums | Employer’s own Level 3 (aerospace-specific) |
Levels | 1, 2, 3 | I, II, III (internal Level III allowed) | Trainee, I, II, III, Instructor | Trainee, 1, 2, 3 (+ Responsible Level 3) |
Typical industries | Cross-industry, industry-specific endorsements required | General industry — oil & gas, transportation, power, construction | Not industry-restricted, built as ASNT’s more rigorous standard | Aerospace only |
Geography | Dominant in Europe, parts of Asia, Middle East; India via ISNT; growing in global oil & gas | Primarily US-origin, used internationally | US national standard | US (NAS 410) / Europe (EN 4179) |
Portable between employers | Yes — certification belongs to the individual | No — tied to the employer | Not explicitly addressed in available sources | No — employer-based |
Typical renewal | 5 years without exam, then 5–10-year recertification cycle (PCN scheme) | “Typically not exceeding five years,” per employer’s Written Practice | Maximum 5 years, mandatory re-exam | See companion NAS 410/EN 4179 article |
Both sources checked for this table agree on the core distinction — third-party and portable (ISO 9712) versus employer-based and non-portable (SNT-TC-1A, CP-189, NAS 410/EN 4179) — and on ISO 9712’s broader international reach against the others’ US or US-aerospace base. The “5–10-year” PCN renewal figure is specific to the UK’s PCN implementation of ISO 9712, not a single universal number stated in the ISO 9712 text itself — other national certification bodies may set different cycles.
What it actually costs
Scheme | Published figures |
|---|---|
ISO 9712 (UK/PCN, 2026 schedule) | Admin/certification fee £95, exam levy £95, renewal without exam £300, deferred-approval fee £106 (all ex VAT); overseas clients pay the ex-VAT rate plus a 20% surcharge |
ASNT9712 / ACCP (US, ISO-9712-based) | Single-technique Level II exam $1,270 member / $1,345 nonmember, rising to $1,620–$2,085 for all techniques; renewal fees are not yet published — ASNT’s own site states “Renewal Fee Details Coming Soon” |
SNT-TC-1A | No universal published fee — cost is whatever the employer’s in-house program costs; there is no central ASNT fee schedule because it isn’t centrally administered |
CP-189 | No fee schedule found (also employer-administered, though with mandatory minimums) |
NAS 410 / EN 4179 | Not covered here — see the companion NAS 410/EN 4179 article |
India (ISNT, IS 13805) | ₹9,000–₹12,000 + GST course fee, ₹5,250 + GST exam fee per method, from one specific 2025/26 training-batch announcement |
Exam-centre sitting fees for several schemes are set by individual accredited centres rather than published centrally, so “total cost to certify” varies by location and provider — treat the figures above as administrative/certification fees, not all-in training costs.
Certification in India
India has its own NDT certification body: the Indian Society for Non-Destructive Testing (ISNT), which runs two schemes:
- Certification under IS 13805, India’s own national standard for NDT personnel.
- The International Certification in NDT (ICN) — accredited to ISO/IEC 17024 and explicitly described by ISNT as “completely based on ISO 9712.”
ISNT is independently listed in ICNDT’s global certification-schemes table, certified to ISO 17024, citing both IS 13805 and ISO 9712 as its certification standards, covering RT, PT, MT, UT, ET, infrared, VT, neutron radiography and acoustic emission, with more than 25,000 people certified.
Important distinction: ISNT is explicitly not recognized as a National Standards Organisation (NSO) of ASNT — ISNT certification is not formally equivalent to or recognized within ASNT’s SNT-TC-1A/ACCP framework. It’s a parallel, India-specific (IS 13805) and ISO 9712-aligned (ICN) scheme.
For career planning: domestic Indian NDT work generally runs on ISNT/IS 13805 certification, while export-oriented work for oil & gas, petrochemical and overseas contracts more often calls for ASNT-influenced employer certification or ISO 9712 (via ISNT’s own ICN route or an international body such as PCN/TWI). This is a general observation based on how ISNT and ICNDT describe their own schemes, not a single source stating it as established industry practice.
For India-specific training costs and provider listings, see OSNDT’s existing NDT Level I course fees and NDT Salary in India articles, and the OSNDT training-provider directory for providers worldwide.
Which scheme for which career path
- Planning to work in aerospace? You’ll need NAS 410 (US-oriented employers) or EN 4179 (Europe-oriented employers) — employer-based, not portable, and not interchangeable with ISO 9712 or SNT-TC-1A. See the companion NAS 410/EN 4179 article for the full mechanics.
- Planning to work in US general industry (oil & gas, power, construction, transportation)? SNT-TC-1A is the default, employer-based framework; some employers instead invoke the stricter CP-189, particularly where a contract or code requires it.
- Want a credential that travels with you between employers, or plan to work internationally? ISO 9712 (or, in the US, ASNT’s ISO-9712-based ASNT9712/ACCP program) is the portable, third-party option.
- Based in India? ISNT’s IS 13805 scheme covers most domestic work; its ICN program (ISO 9712-aligned) is the route toward internationally portable certification without leaving the ISNT system.
- Switching industries or countries? Expect to re-certify under the new scheme — none of these four map cleanly onto each other, and “Level 2” in one scheme doesn’t automatically transfer to “Level 2” in another.
Key takeaways
- ISO 9712 is third-party and portable between employers; SNT-TC-1A, CP-189 and NAS 410/EN 4179 are all employer-based and generally not portable.
- CP-189 is a mandatory ANSI/ASNT consensus standard; SNT-TC-1A is a non-mandatory recommended practice — the same employer-based philosophy, different legal weight.
- Aerospace runs on NAS 410 (US) or EN 4179 (Europe); general US industry runs on SNT-TC-1A or CP-189; international and portable work runs on ISO 9712.
- India has its own scheme, ISNT/IS 13805, plus an ISO-9712-aligned route (ICN) for internationally portable certification — ISNT is not ASNT-recognized.
- Published certification fees exist for ISO 9712 under the UK’s PCN scheme and for ASNT’s ISO-9712-based ASNT9712 program; SNT-TC-1A and CP-189 have no central fee schedule because they’re employer-administered.
- None of these schemes’ levels map directly onto each other — switching industries or countries generally means re-certifying under the new scheme.
FAQs
What’s the difference between ISO 9712 and SNT-TC-1A? ISO 9712 is third-party: an independent certification body certifies you, and the credential travels with you between employers. SNT-TC-1A is employer-based: your own employer certifies you, and that certification generally doesn’t transfer if you change jobs.
Is CP-189 the same as SNT-TC-1A? No. Both are employer-based, but SNT-TC-1A is a non-mandatory “recommended practice” employers can tailor, while CP-189 is a full ANSI/ASNT consensus standard with mandatory minimum hours once a contract or spec invokes it.
Which scheme do I need for aerospace work? NAS 410 (US-oriented employers) or EN 4179 (Europe-oriented employers) — see the companion NAS 410/EN 4179 article for full mechanics.
Can I transfer my certification between countries? Only if it’s a portable, third-party credential like ISO 9712. Employer-based certifications (SNT-TC-1A, CP-189, NAS 410, EN 4179) generally don’t transfer.
What certification do Indian NDT technicians need? Most commonly ISNT’s IS 13805 scheme for domestic work; its ICN program (ISO-9712-aligned) for internationally portable certification. ISNT is not an ASNT-recognized body.
How much does certification cost? Figures vary widely by scheme and country — the UK’s PCN (ISO 9712) scheme publishes clear administrative fees; SNT-TC-1A and CP-189 have no central fee schedule since employers administer them directly. See the costs table above.
How often do I need to renew? Typically around 5 years across all four schemes, though the exact mechanism differs — ISO 9712/PCN allows renewal without exam within 5 years, then exam-based recertification at 5 or 10 years; CP-189 requires re-examination at a hard 5-year maximum; SNT-TC-1A leaves the renewal path to the employer’s Written Practice.
References
- BINDT, PCN General scheme document (PCN24-GEN-INT.pdf) — ISO 9712/PCN levels, methods, training/experience hours, renewal mechanics.
- Quality Magazine, “Certification Standards Within Nondestructive Testing: Options for NDT Personnel.”
- BINDT, PCN fee schedule (PSL35, 2026 edition) and PCN FAQs.
- ICNDT, global certification-schemes comparison table (Cert_Schemes_table.pdf).
- TUV Rheinland / Quality Magazine, NDT certification comparison article.
- Quality Magazine — SNT-TC-1A industry usage.
- ASNT, source.asnt.org general SNT-TC-1A training-hours page.
- Open Exam Prep, SNT-TC-1A vs. CP-189 study guide; ASNT’s own certification.asnt.org Recertification page.
- ASNT’s own certification.asnt.org ASNT9712 Level II fee page.
- ISNT, NDT Level II training and certification fee announcement (one specific 2025/26 batch).
- ISNT, Technical Management Board (TMB) page describing the IS 13805 and ICN schemes.
Further reading
- NAS 410 and EN 4179 Certification Explained — full aerospace-specific certification mechanics.
- Aerospace NDT: Methods, Standards and Certification — the aerospace method-selection hub.
- OSNDT’s existing NDT Level I course fees and NDT Salary in India articles — India-specific cost and pay context.
- OSNDT’s existing NDT Level 1/2/3 salary article — US-focused pay by level across schemes.
- OSNDT’s training-provider directory — global training providers by location.
- CWI Exam Preparation Guide — a related certification path (welding inspection) with its own third-party exam structure.




There are no comments yet!