Table of content
- What is the CWI, and who issues it?
- The three exam parts
- Eligibility: education and experience tiers
- Choosing and using your Part C code book
- Building a study plan for each part
- Renewal and recertification
- CWI (AWS) vs. ASNT NDT personnel certification — not the same credential
- Where to get CWI exam prep: American Institute of Nondestructive Testing (AINDT)
- Common mistakes
- Key takeaways
- FAQs
- References
- Further reading
What is the CWI, and who issues it?
The Certified Welding Inspector (CWI) credential is issued by the American Welding Society (AWS), not by an NDT personnel-certification body. It qualifies an individual to inspect welds and welding procedures against a governing welding code — most commonly AWS D1.1, Structural Welding Code–Steel — rather than certifying competency in a specific nondestructive testing method. Welding inspectors pursue CWI because many fabrication contracts and codes specifically require inspection be performed or supervised by a CWI (or an equivalent AWS credential), making it a practical prerequisite for inspection work on structural steel, pressure piping, and related welded fabrication. Source: AWS’s own CWI certification page, aws.org/certification/cwi.
The three exam parts
Per AWS’s own CWI certification page, the CWI exam has three parts, each requiring a minimum score of 72%:
Part | What it covers | Format |
|---|---|---|
A — Fundamentals | Destructive testing, fabrication math, safety, metallurgy, nondestructive testing basics, welding symbols, WPS/PQR, general welding fundamentals | 150 questions, computer-based testing at Prometric centers |
B — Practical | Hands-on activities with AWS-provided equipment and weld replicas: applying WPS/PQR, using inspection tools and methods, executing and judging required welds | Hands-on component plus 46 related questions; given only at AWS seminar locations on fixed dates |
C — Code Book | Applying a chosen governing welding code to inspection scenarios | Open-book, 50–65 questions; candidate brings one code book from AWS’s approved list |
AWS does not publish explicit per-part time limits on its CWI page; candidates should get exact timing from AWS’s official exam-day materials. A consolidated score report for Parts A and C is emailed roughly two weeks after the exam date.
Source: AWS, aws.org/certification/cwi.
Eligibility: education and experience tiers
AWS sets CWI eligibility as a combination of education and welding-related work experience — more education substitutes for some required experience, but never all of it:
Education | Minimum welding work experience required |
|---|---|
Bachelor’s degree or higher in welding engineering/technology | 1 year |
Associate’s degree or higher in welding, or a non-welding engineering/physical-science degree | 2 years |
Engineering/technical coursework applicable to a welding bachelor’s | 3 years |
Trade or vocational coursework | 4 years |
High school diploma or equivalent | 5 years |
8th-grade schooling | 9 years |
Less than 8th-grade schooling | 12 years |
A vision test (near and far acuity, color discrimination) is also required as part of certification.
Source: AWS, aws.org/certification/cwi.
Choosing and using your Part C code book
For Part C, each candidate selects and brings exactly one code book from AWS’s approved list, which includes AWS D1.1 (Structural Welding Code–Steel), API 1104, AWS D1.2, AWS D1.5 (incl. Clause 12), AWS D15.1, AWS D17.1, ASME BPVC Section IX, ASME B31.1, ASME B31.3, or an applicable ISO standard. Edition years are not fixed across every part of AWS’s own published guidance — for example, AWS’s reciprocity/waiver section has at times listed older editions than its main eligibility section for the same code. AWS directs candidates to its current Official Exam Reference Guide to confirm which edition applies to their specific exam date.
On tabbing and annotating the code book: AWS’s official, current wording on exactly what markings (tabs, highlighting, handwritten notes) are permitted in the code book during the exam is not readily available beyond informal AWS user-forum discussion, which is not an authoritative source. Before your exam, get this policy directly from AWS’s own CWI Examination User Guide and Official Exam Reference Guide, both linked from aws.org/certification/cwi, rather than relying on forum posts or any third-party article.
Building a study plan for each part
AWS’s own official path. AWS runs official CWI preparatory seminars that bundle fundamentals review, practical/hands-on preparation, and code-book orientation ahead of the exam — this is the one directly AWS-sourced prep offering, and candidates should treat it as the baseline official prep path. Details and current seminar schedules are on AWS’s own CWI page, aws.org/certification/cwi.
How third-party prep providers structure their courses. Trade-press coverage of one AWS-recognized prep provider, the American Institute of Nondestructive Testing (AINDT), documents a course built around a 40-hour self-paced online module for Part A fundamentals and code study, followed by a 40-hour in-person module covering Part B hands-on visual inspection, lectures, and practice exams, with candidates sitting the AWS exam immediately afterward. This describes how one real, named prep provider organizes CWI study — it is not an AWS requirement or recommendation, and other providers structure their courses differently. Source: The Fabricator, “American Institute of Nondestructive Testing to provide CWI exam prep course in Houston”.
Part A — Fundamentals. Review welding processes, metallurgy, fabrication math, safety, and the NDT-basics and welding-symbols content AWS lists as in scope; practice with timed multiple-choice question sets covering those topic areas.
Part B — Practical. Since this part is hands-on and only offered at AWS seminar locations, practice the physical skills it tests directly where possible: visual weld inspection technique, correct use of inspection gauges and tools, and judging welds against AWS’s “Book of Specifications” criteria used in the exam.
Part C — Code Book. Practice navigating your chosen code book quickly — locating specific clauses, tables, and acceptance criteria under time pressure — since the exam is open-book but still time-constrained. Tab-color-coding systems and similar organizational techniques are widely recommended by test-takers and prep providers; these are practitioner convention, not an AWS-endorsed method, and should be built within whatever annotation rules your official Candidate Handbook actually permits.
Renewal and recertification
CWI certification is valid for 9 years. AWS requires renewal roughly every 3 years within that cycle, and candidates must attest to no break in welding-related practice or employment longer than 2 years within the prior 3 years. Confirm your specific renewal deadlines and any grace period directly from your AWS certification account or AWS’s current CWI Renewal/Recertification package.
At the 9-year mark, recertification requires one of:
- Passing the Part B Practical exam again
- Passing an endorsement exam
- Completing 80 Professional Development Hours (PDHs), with at least 20 earned in the most recent 3 years
- Holding an endorsement or an earned Certified Radiographic Interpreter (CRI) credential
- Completing a 6-day AWS 9-year recertification course
Source: AWS’s CWI 9-year recertification package, app.aws.org/certification/docs/CWI_9yr_pkg_v7.pdf.
CWI (AWS) vs. ASNT NDT personnel certification — not the same credential
CWI and ASNT certifications are issued by different bodies for different competencies, and this article does not conflate them. CWI is issued by AWS and qualifies an individual to inspect welds against a governing welding code (such as AWS D1.1) — it tests, among other things, fundamentals of NDT as applied to weld inspection, but it is not an NDT-method personnel certification. ASNT (American Society for Nondestructive Testing) governs a separate family of documents — ANSI/ASNT CP-189, SNT-TC-1A, ANSI/ASNT CP-9712 (the U.S. adoption of ISO 9712:2021), ANSI/ASNT ILI-PQ, and CP-105 — that qualify NDT personnel (Level I/II/III technicians in UT, RT, MT, PT, and other methods) for competency in a specific NDT method. ASNT’s own standards page makes no mention of CWI at all, underscoring that the two tracks are run independently. A welding inspector pursuing CWI is not thereby NDT-Level-certified, and an ASNT-certified NDT Level II/III technician is not thereby a CWI; the two credentials are complementary, not interchangeable, and a reader needing both should pursue them separately. Source: ASNT, asnt.org/standards.
Where to get CWI exam prep: American Institute of Nondestructive Testing (AINDT)
The American Institute of Nondestructive Testing (AINDT), based in Baxter, Minnesota (trainingndt.com), does real, verifiable CWI-relevant work: it advertises a comprehensive CWI Exam Prep Course and runs blended online/in-person NDT training with an 18-day hands-on component at its Baxter facility, plus ASNT Personal Training Publication student packages and job-placement assistance.
Trade-press coverage of a specific AINDT CWI prep course documents a 40-hour self-paced online fundamentals module paired with a 40-hour in-person hands-on module, with the AWS exam sat immediately afterward.
Readers considering a formal prep course should contact AINDT or another AWS-recognized provider directly to confirm current course dates, pricing, and content.
Common mistakes
- Assuming CWI is an NDT-method certification. It is a weld-inspection credential issued by AWS, governed by a welding code; it is not an ASNT NDT Level I/II/III certification, and the two should not be conflated when planning a certification path.
- Treating an outdated code-book edition as current. AWS’s own guidance has, at times, differed across sections on which code edition applies; always confirm the edition against AWS’s current Official Exam Reference Guide for your specific exam date rather than relying on a fixed year.
- Relying on forum posts for the code-book tabbing policy. Informal AWS user-forum discussion is not an authoritative source for what markings are permitted; get this from AWS’s own CWI Examination User Guide and Official Exam Reference Guide.
- Treating a third-party prep provider’s course structure as an AWS requirement. AWS’s own seminars are the official prep path; independent providers like AINDT structure their own courses differently, and their format is a description of one provider’s offering, not an AWS mandate.
- Assuming Part B can be taken anywhere. Unlike Parts A and C, Part B’s hands-on component is only offered at AWS seminar locations on fixed dates — plan around that constraint early.
Key takeaways
- CWI is issued by AWS, not by an NDT-certification body like ASNT; it qualifies weld inspection against a governing code, not NDT-method competency.
- The exam has three parts — Fundamentals (150 questions), Practical (hands-on plus 46 questions, seminar-only), and Code Book (50–65 open-book questions) — each requiring a 72% minimum score.
- Eligibility combines education and welding work experience on a sliding scale, from 1 year (bachelor’s in welding engineering) to 12 years (less than 8th-grade schooling), plus a vision test.
- Code-book edition years and tabbing/annotation rules should be confirmed directly from AWS’s current official materials.
- CWI certification lasts 9 years, with renewal required roughly every 3 years and one of five recertification pathways required at year 9.
FAQs
Is CWI an NDT certification? No. CWI is a weld-inspection credential issued by AWS, governed by a welding code. NDT personnel certifications (Level I/II/III in UT, RT, MT, PT, etc.) are governed separately by ASNT documents such as SNT-TC-1A and ANSI/ASNT CP-9712.
How many parts does the CWI exam have, and what’s the passing score? Three parts — Fundamentals, Practical, and Code Book — each requiring a minimum score of 72%, per AWS’s own certification page.
Which code book should I bring to the exam? One code book from AWS’s approved list (e.g., AWS D1.1, API 1104, ASME BPVC Section IX, among others), matched to the exam date’s current Official Exam Reference Guide, since applicable editions can change.
Can I tab or highlight my code book during the exam? AWS’s exact current policy on tabbing or annotation is not available in an easily citable official document — only informal forum discussion addresses it. Confirm the specific rule from AWS’s own CWI Examination User Guide and Official Exam Reference Guide before your exam.
How long is CWI certification valid, and how do I renew it? Nine years, with renewal required roughly every 3 years (exact due dates and any grace period should be confirmed from your AWS certification account), and recertification at year 9 via one of five pathways (Part B retake, endorsement exam, 80 PDHs, an endorsement/CRI credential, or a 6-day recertification course).
References
- AWS (American Welding Society), CWI certification page, aws.org/certification/cwi — exam structure, parts, scoring, eligibility tiers, code-book list, official prep seminars.
- AWS, CWI 9-year recertification package, app.aws.org/certification/docs/CWI_9yr_pkg_v7.pdf — renewal cycle and recertification pathway detail.
- The Fabricator, “American Institute of Nondestructive Testing to provide CWI exam prep course in Houston” — third-party trade-press documentation of AINDT’s CWI prep course structure.
- NDT.org, AINDT (American Institute of Nondestructive Testing) vendor listing, ndt.org/vendor.asp?ObjectID=64624 — organization confirmation and services offered.
- ASNT (American Society for Nondestructive Testing), standards page, asnt.org/standards — confirms ASNT’s separate NDT-personnel-certification documents and absence of any CWI reference.
Further reading
- Comprehensive Guide to Visual Inspection in Welding Quality — covers AWS D1.1 visual criteria and CWI qualification context.
- Welding Symbols: Types, Meaning, Welding Codes
- Understanding Weld Discontinuities — what inspectors evaluate against code acceptance criteria.
- SNT-TC-1A NDT Certification Program — for the ASNT-vs-CWI distinction.
- What Is ASNT? — for the ASNT-vs-CWI distinction.
- NAS 410 and EN 4179 Certification Explained — the aerospace-specific, employer-based counterpart to CWI’s third-party model.
- NDT Certification Guide: ISO 9712, SNT-TC-1A and NAS 410 — compares the NDT-method personnel schemes referenced above.
- Weld Inspection: Visual, Surface and Volumetric NDT — the inspection methods and codes a CWI applies on the job.




There are no comments yet!