AlphaGage+ Corrosion (C )
Uses dual element transducers to measure remaining wall thickness on primarily steel structures subject to corrosion.
- Compatible with a wide variety of dual element and a limited number of single element transducers
- Wide thickness range (.020” to 23” depending on gage type, material and transducer)
- Echo-to-echo readings to ignore coatings
- High temperature probes available up to 950F/509C (intermittent use)
- Temperature correction
- Gridview
- Password lock
- Supervisor and other locks
- 2,700 stored setups
- Change color and vibrate on alarm
AlphaGage+ Precision (P)
Allows for the use of single element transducers along with up to 2,700 stored application setups with 1 micron resolution.
- 0.006-23” range in steel
- 1 micron resolution (0.0001” or 0.001 mm)
- Single element, contact, delay line and immersion transducers (1-30 MHz)
- Supervisor and other locks
- 30 Mhz bandwidth
- Zoom Auto Tracking
- Multiple modes for challenging applications
- Square wave Pulser
- Auto Phase Reversal Detection with alarm






Share this Product
If you like this product share it with your friends
LinkedIn
Facebook
WhatsApp