SIUI NDT

SyncScan 3 is a 64:128PR PAUT flaw detector with a total focusing method (TFM) and 4-ch TOFD, which brings more possibilities for your inspection in oil & gas, transportation, aerospace, shipbuilding, and manufacturing industries.

Features:

• TFM 3D real-time imaging. 
• Up to 6 TFM modes at one time.
• Support TFM image resolution 1024x1024 & raw FMC data recorded.  
• 64 channel PAUT with higher sensitivity and SNR, ideal for ≥100mm thick welds.

Functions:

• Fitting Curve Algorithm in TFM (Published patent)
• Free selection of TFM image resolution and support up to 1024x1024.
• TFM 3D real-time imaging, with higher resolution & more intuitive results.
• Up to 6 propagation modes can be displayed simultaneously to better identify and size flaws.

SyncScan 2 is a 32:128PR PAUT flaw detector with an optional 2-ch TOFD, which can improve your efficiency for PA and TOFD.

Features:

• Light weight: 4kg only including battery.
• Faster scan speed (Approximately 3 meters/minute).
• Removable electric fan: cool down the system when at high temperature.
• 1 or 2 ch-TOFD for your selection by license activation.
• Support UT/PA/TOFD, suitable for weld, forging, and plate inspection.
• 32-channel PA is more suitable for inspection on extra-thick walls and high-attenuation material.
• 32-channel PA and 2-channel TOFD work simultaneously on pressure vessel inspection (TOFD can measure thickness up to 100mm).
• Support pitch and catch (PR) mode, corrosion inspection with dual linear array probe.
• System ports: Encoder (support biaxial coding), SD card, USB 2pcs, VGA, Ethernet.
• Probe ports: 4 ports for UT/TOFD probes, 1 port for PA probe.

SyncScan incorporates Phased Array, TOFD and thickness measurement functions into one compact unit, which can reduce your cost for Phased Array and TOFD.

Features:

• IP65
• Light Weight: 3.75 kg with battery
• Large touch screen: 8.4" LCD with a resolution 800×600 pixels
• Smart test wizard guides you step by step from creating your PAUT/ TOFD setups to reports.
• Upgradeable from Conventional UT to PA/ TOFD/ TG

Features:

•  IP 66
  
•  Compact size: 198 (W)* 128 (H) *52 (L) mm
•  Light weight: 0.9kg only, including battery
•  5.7" LCD with high resolution 640×480 pixels

 Ultrasonic testing functions：

• Standard: Weld/ plate/ forging test wizards, DAC, AVG/ DGS, AGC (Auto gain control), peak memory, video record, etc.
• Optional: B-Scan, TCG, FFT (probe spectral analysis), CSC (curved surface correction), flat weld simulation, crack height measurement, BEA (backwall echo attenuator), AWS, API 5UE.

 Ultrasonic thickness measurement functions：

• Standard: A-scan thickness measurement (echo to echo mode, through coating measurement), auto-search, velocity measurement, alarm and dataset management.
• Optional functions: CoatMode, B-Scan, multilayers, Vpath, TDG and temperature compensation.

• Compact & Portable: The whole unit weight (battery included) is approx. 1.2kg, suitable for aloft and fieldwork.
• Easy to Use: There are just a few concisely-defined keys, easy to be operated with only one hand.
• Environmental Protection: This system is designed based on the IP65 standard, suitable for complex industrial flaw detection environments.
• Low Consumption: The configured Li-polymer battery can support up to 7 hours of continuous operation.
• Strong Performance: High resolution and penetration, achieving precise flaw detection from thin plates to large forged pieces.