Modsonic Instruments Mfg. Co. (P) Ltd.

Very handy and light in weight (only 2.3 kgs with battery)

TFT(Colour LCD) provides wide viewing angle and allows fast scanning speed.

Very long battery operation of 8 hours between charges

Digital plotting of DAC curves with automatic -6dB and -14dB curves

Very low noise level even at very high gain

‘Video Signal’ Output for connection to a TV and recording device

PEAK FREEZE to detect maximum Echo height (Echo Dynamic)

Smooth parabolic DAC curves

Note/Label can be attached with each of A-Scan data

Option of FLANK and PEAK Trigger

Selection of Metric or British Unit

FOR SEGREGATION OF CASTINGS ACCORDING TO % NODULARITY

Memory of 2000 Readings

Computer Connectivity

Resolution 1m/sec

One Step Calibration

Operates on TWO AA Batteries

Sealed Touch Key Pad

Built-in Calibration Block

EL back-light for indoor/dark areas (optional)

Built-in DGS/AVG curves for time proven flaw size evaluation

It has TCG (Time Controlled Gain) which compensates for amplitude decay with distance. A very useful feature

Dynamic DAC curves which allow change of Test Range and Gain after plotting them

Built-in software for evaluation as per AWS standard

Thickness Survey

Encoded B-Scan

Measurement resolution of 0.01mm
Test Range : 2.5mm to 10 meters (Steel)
Auto Tracking for immersion testing and thro' coating/Oxide Scale Thickness Measurement.
Minimum thickness capture mode.
Powerful 'Thickness Data Management Software' for thickness logging in Sequential, 2D and 3D file configurations.
Dual independent gates with different colours for two separate measurements.

Flaw Detection

Colour coded skips/legs during weld inspection
Peak Freeze/Active Echo Dynamic feature.
Tuned Amplifier for better performance.
RF display for better measurement accuracy and flaw characterization.
Auto Calibration / Two point calibration.
PRF down to 4 Hz for large objects / forgings to avoid phantom echoes.
Simultaneous display of four measurement values.
Frequency down to 250 KHz (0.25 MHz) for checking composites and highly attenuative materials
Probe frequency upto 20 MHz for testing on low thicknesses and better sensitivity.

Flaw Sizing

Dynamic DAC, DGS/AVG,TCG features and AWS software (AWS D1.1/D1.5).
DAC as per ASME, ASME III, JIS.
Memory
On-board memory of 500 A-scan, 20,000 thickness data, 50 B-scan, 50 set-ups.
Virtual unlimited storage capacity extension thor’ the use of USB removable disc (pen drive).
Communication / General
Rotary scroll knobs for analogue feeling.
USB port for connectivity with PC and peripherals.
World-class Li-lon battery with option of using 6 normal C size alkaline batteries.
VGA output for external monitor or video projectors / beamers.
Complies to EN-12668 and ASTM E317.
Five options of display background colours including black and white for day light viewing.
All joints with gasket for IP sealing.
On-board battery charger. Optional external charger

For improvement of near and far surface resolution lateral and Backwall echo can be removed.
TOFD data linearization.
Straightening of TOFD data using apex matching technique or by manually shifting of A-Scan is
possible.
Contrast setting of D-Scan image is possible for easy interpretation.
Defect marking on D-Scan image.
D-Scan data zooming control.
All A-Scan data can be exported to Excel for further analysis.
Multiple file joining and splitting of file is possible.

Digital Ultrasonic Signal Rail Tester

Light Weight.
Provision of probe mounting for Field face checking.
Bi-Direction positional sensor for track length/position measurement.
In built Bi-Direction length/position display.
10 Memory location to store set-ups.
Same Battery type for Multiplexer and Ultrasonic Flaw Detector for interchangeability.

High brightness colour TFT display
Memory of 200 A-Scan patterns and 50 calibration set-ups
Special memory set-ups for Rail weld test
Special Test Rig forTandem Testing Technique
Direct digital display of depth and distance of flaws
Compact and light weight (2.3 Kg)

MUX-8

Memory of 2000 Readings*
Computer Connectivity*
0.01 mm (10 microns) Resolution **
One Step Calibration
Operates on Two AA Batteries
Sealed Touch Key Pad
Built-in Calibration Block
EL back-light for indoor/dark areas (optional)

Sturdy, Full Stainless steel housings
Customized probes is our specialization
Wide range of standard probes
Special probes and attachments for Indian Railways for axle testing

Probes Cables & Adaptors

Probe Cables with LEMO and BNC connectors are available in any cable length
( 2 meters being stander length ).
Probe Cables with LEMO and BNC connectors are available in any cable length
( 2 meters being stander length ).

Probe Attachments
Delay Lines :
(A) Contour Correction Delay-Lines : These are made of Perspex and are available in concave or convex type, for direct attachment to normal probes of 10mm dia./ 24mmm dia.of customer specified radius of curvature and length. It comes with an aluminum threaded ring suitable for MODSONIC and KRAUTKRAMER probes. (Note : These are suitable only for single crystal normal probes).
(B) High Temperature Delay Lines : Made of special polyimide high temperature resistant polymer. It can withstand surface temperature up to 250 deg. C. It can be attached with single crystal normal probes of 10mm dia. or 24mm dia. using the provided threaded ring. It can be attached with MODSONIC or KRAUTKRAMER probes. Customers to specify length of delay - line required and type of probe.

Protective Membrane :
For use on single crystal normal probe, to reduce to wearing of the probe face and enhance the probe life. These are made of high abrasion resistant polymer with low sound attenuation
ES 45 : For 24mm dia. Probes.
ES 24 : For 10mm dia. Probes.
Wear Plates ( Soles ) :
For use on angle beam probes to salvage the probes with worn-out face. Wear plates can be stuck to the face of the angle probes using adhesive.
WP : For Angle Probes ( 20 x 22mm ) ( BW Series )
MWP : For Miniature Angle Probes ( 8 x 9mm ) ( MBW Series ).

UTRD – 3

Records 5 hours (with internal memory) of continuous Ultrasonic Testing for archival purpose
TPI / Surveyor can review the testing at their convinient time and place
It is simple pocket size battery operated device
Review is possible on display of UTRD-2 itself or on a PC after simple downloading or on a TV

EdPrint-1 (Special Software and Printer for EDISON Series)
Compact Printer for on-site use.
Quick print-out of full data, without PC.
Plain paper printer mechanism used.
EdSoft.01 ( Special Software for EDISON - SERIES )
Interface software to download Thickness Measurement Data from EDISON - 1M to PC.
Data analysis in EXCEL possible.
Enquiry for customized version welcome.