Flawtech

FlawTech is known as an innovator within the NDT industry regarding flawed specimens and the methods used in their manufacturing. FlawTech uses several different flaw manufacturing techniques and processes it has developed and honed over its 36 years in the business of flaw manufacturing. FlawTech has the capacity to manufacture well over 40 different flaw types. As NDT inspection methods continue to evolve so do FlawTech’s manufacturing techniques. FlawTech takes into consideration the NDT inspection methods used to inspect their specimens prior to manufacturing. FlawTech encourages its clients to consider the history and longevity of the company they purchase their flawed specimens from. Because there is a difference in quality and quality is critical. Below are some images of flaws and screen images of FlawTech flaws.

The Ultimate NDT Training and Testing Flawed Specimen Kit:

• The Kit assist in the training and testing of at least 6 different NDT methods; UT, RT, MT, PT, VT & ET
• Kit contains 30 flaws which cover a wide range of pre-service and in-service flaws types.
• Great for comparing indication responses of the different NDT methods.

Kit Specifications:

• Set of 10 Specimens
• Specimen Alloy Mild Carbon Steel
• Custom Alloys Available

Each Specimen will contain 3 flaws

• Total of 30 flaws in the Kit.

Each specimen contains flaws that are designed to be detectable using multiple NDT methods.

• Flaws are detectable by a variety of NDT methods; VT, MT, PT, UT (Conventional & PAUT), RT, ET.
• Please note that not all flaws are detectable with every method.

Specimen Geometries Include:

• (1) Tee, 0.375” T x 4” X 8” x 4” w/ Double Bevel Weld
• (1) Tee, 0.375” T x 4” x 8” x 4” w/ Single Bevel Weld w/ Backing Bar
• (1) Tee, 0.5” T x 4” x 8” x 4” w/ Double Fillet Weld
• (2) Plates, 0.625” T x 4” x 8” w/ Single V Weld Bevel
• (1) Plate, 0.625” T x 4” x 8” w/ Double V Weld Bevel
• (1) Plate, 0.375” T x 4” x 8” w/ Single V Weld Bevel
• (1) Plate, 0.375” T x 4” x 8” w/ Single V Weld Bevel w/ Backing Bar
• (1) Plate, 0.5” T x 4” x 8” w/ Single V Weld Bevel
• (1) Pipe, 4” Sch160 (0.5” wall) x 8” w/ Single V Weld Bevel

Kit Documentation Includes:

• Certificate of Conformance
• As Built CAD Drawings
• UT Inspection Reports
• RT, Digital & Film Radiograph Film and Technician Sheet
• Measuring & Test Equipment Certificates
• Test Sheets (used during technician training and testing)

Kit Includes 2 Carrying Case(s)