AeroCheck
Know MoreEquipments
back to companies
Loading…Loading…MANUFACTURERS OF EDDY CURRENT EQUIPMENT AND NON-DESTRUCTIVE TESTING EQUIPMENT
We are a dedicated manufacturer of Eddy Current (ECT) non-destructive testing (NDT) equipment, probes and accessories and the 'go to' company for all your Eddy Current (EC) NDT Solutions.
ETher NDE is based in St Albans, Hertfordshire, UK and has a global network of distributors.
We believe our customers deserve the best; the best Eddy Current equipment, the best Eddy Current probes, the best Eddy Current knowledge and the best service. We know that the Eddy Current NDT market is very specialised so we strive to give our customers the highest level of Eddy Current expertise. We were tired of Eddy Current NDT not getting a big enough spotlight in its own right, so we built a company based on it!
Product
United Kingdom
ETher NDE offers an extensive range of Eddy Current (ECT) NDT instruments to cater for a wide variety of industries, applications and operators. We pride ourselves of developing innovative and end-user focussed equipment and we are continuously striving to develop our product range.
AeroCheck 2
The AeroCheck has been targeted for the exacting needs of the aerospace industry. Common areas on an aircraft that can be inspected with the AeroCheck Series include wheel brakes, wheels and landing gear, fasteners and fastener holes, engine mounts, fuselage, wing surface and hinges, bulkheads, tail plane, door access points, window frames, engine blades and engine discs.
Fully capable of all the common eddy current inspection applications you may encounter on an aircraft including paint thickness, sub-surface and surface crack detection, the AeroCheck is the ideal eddy current instrument for the job.
The AeroCheck Eddy Current Flaw Detector is designed and manufactured in the UK and uses industry standard 12-Way Lemo and Co-axial Lemo 00 connectors, offering rotary drive capabilities as standard and also absolute, bridge and reflection probe modes without the need for adapters.
WELDCHECK 2
The WeldCheck Eddy Current (ECT) Flaw Detector from ETher NDE appeals to users within a wide range of industries including Offshore and Rope Access non destructive testing (NDT) applications.
The WeldCheck EC Flaw Detector is lightweight, compact and cased in tough aluminium alloy Mg Si 0.5 powder-coated outer case and has been designed with the end user in mind.
Designed and manufactured in the UK by the ETher NDE team and fitted with industry standard 12-Way Lemo and Co-axial Lemo 00 connectors, the WeldCheck is able to use absolute, bridge and reflection probes without the need for adaptors.
The WeldCheck ET Flaw Detector offers a crisp, clear daylight viewable screen, user friendly interface and menu systems.
MULTI-FREQUENCY EDDY CURRENT (ECT) FLAW DETECTOR - ETI 200
The ETi-200 is designed to offer advanced multi-frequency and multi-channel Eddy Current (ET) flaw detection housed in the smallest portable Eddy Current (EC) package on the market.
Appealing to all sectors within NDT, the ETi-200 allows the Operator to programme not only frequency, but many other advanced functions.
The ETi-200 not only excels in terms of technology, but has been designed to be rugged enough to cope with some of the on-site environments it will be undoubtedly exposed to. Built with a cast aluminium chassis overlaid with rubber over-moulding meeting IP54 standards, the ETi-200 is built to withstand the harshest of conditions.
As well as offering the Operator advanced technology and protective packaging, the ETi-200 weighs just 2.8kg (6.2lbs) with a compact footprint that has been ergonomically designed with the end-user in mind and providing an adjustable hand-strap and harness attachment points.
VEESCAN EDDY CURRENT (ECT) WHEEL INSPECTION SYSTEMS
The VEESCAN is ETher's first Wheel Inspection System and is available in two different models, VEESCAN H for maximum flexibility and VEESCAN R for optimised productivity. The VEESCAN has a proven mechanical design and established record of breakdown-free operation for 365 days or more. Appealing to many companies in the Aerospace industry and with the choice of two, fully featured options, the VEESCAN is ideal in all aircraft wheel-testing environments.
The VEESCAN is able to be configured with a wide choice of probes and allows any wheel testing facility the flexibility to select the system most compatible with their workload. Teamed with a full choice of operation modes, the VEESCAN maximises the probability of detection.
The VEESCAN is offered with the ETher NDE guarantee of complete client satisfaction and excellent technical support.
The SigmaCheck2 Eddy Current (ECT) Conductivity Meter is designed to provide the user with fast and accurate conductivity measurements at a reasonable price.
The SigmaCheck2 EC Conductivity Meter is extremely easy to use making it suitable for use by shop inspectors or engineers.
The SigmaCheck2 ET Conductivity meets the requirements for conductivity measurements in the Aircraft manufacture and maintenance fields where conductivity measurements are used to verify proper alloy/temper or detect heat damaged components. The SigmaCheck2 Eddy Current Conductivity Meter is also useful to determine the purity of precious metals (counterfeit detection) such as gold bullion and coins.
We know how long winded Probe Catalogues can be so we have split ours into different probe types to make it quicker for you to find the probe you need. We have also produced a Short Probe Catalogue which contains all the most commonly used probes that you use on a regular basis.
If you don’t see something here to meet you requirements please visit our Eddy Current (EC) Special Probes page or fill in our Special Probe Design Check Listand send it to [email protected] where we will be more than happy to assist you.
Pencil Probes
At ETher NDE we design and manufacturer all our Eddy Current (ECT) probes in house and with the ability to design your probes to the exact non-destructive testing (NDT) application you have, even the 'simple' Pencil Probe becomes specific to you.
With the most common Eddy Current (EC) Pencil Probes available 'on-stock', we can promise you rapid delivery on these Probes, meaning that you can be back to inspecting in the fastest possible time.
Thread Inspection Probes
Thread Inspection Probes are designed for use in the inspection of internal and external thread sections. Chisel and pointed tips make them ideal for detecting cracks propagating in the root areas.
Broad Band Probes
Eddy Current (ECT) Broad Band Probes are extremely versatile and work within many applications within Non-destructive Testing (NDT). Designed as a heavy-duty range of probes that can be used for general industrial use with impedance plane instruments only.
Weld Probes
ETher NDE can offer a broad range of Eddy Current (ECT) Weld Probes including specially designed Eddy Current (EC) Weld Probes to your specification.
Eddy Current Weld Probes are specifically designed for the task of weld inspection of non-ferrous welds and steel structures. They can detect surface cracks on a weld with a non-conductive surface coating on it of up to 2mm.
Internal Diameter Probes
Our range of ID Probes are designed hand in hand with our Cables to offer the best options when working in the field. With our Dis-connectable Cables if either the Probe or Cable fails, the operator can easily swap them for another and carry on with their inspection reducing interruption to their inspection and the cost of having to replace both the Probe and Cable.
Surface Inspection Probes
For general purpose inspection of sub-surface corrosion and flaws.
This probe has excellent depth penetration making it ideal for multi-layer inspections with a broad frequency ranges, excellent low frequency performance, integrated 4-way Lemo connector and built in balance coils.
ETher NDE can offer a broad range of Eddy Current (ECT) Weld Probes including specially designed Eddy Current (EC) Weld Probes to your specification. To view our range of Eddy Current (ET) Weld Probes, please click here.
Eddy Current Weld Probes are specifically designed for the task of weld inspection of non-ferrous welds and steel structures. They can detect surface cracks on a weld with a non-conductive surface coating on it of up to 2mm.
The application specific design of the probe means that it is capable of inspecting welds with uneven surfaces and coatings on them.
Welds are often coated or painted making access to the weld for inspection more complicated when using other methods to Eddy Current (EC). For example, MPI and Dye Penetrant Inspection require the removal of the coating before inspection, costing both money and time. Eddy current (ECT) Weld Probes allow welds to be efficiently inspected for near-surface cracks because the weld can be inspected through paint or metallic coatings.
We are pleased to be able to offer two Rotary Drives to meet your application needs.
Eddy current rotary inspections of fastener holes and countersinks are performed routinely in the Aircraft Maintenance Industry and now the method is also being used increasingly in the power generation industry for the inspection of bolt-holes on wind turbines. High-speed surface inspection is also another area of increasing usage.
Applications
The Mercury Rotary Drive is perfect for tight spaces due to its small size. The Mercury Rotary Drive is designed and manufactured in-house.
The Mercury Rotary Drive is compatible with:
With every Rotary Drive, you need Rotary Probes. At ETher NDE we have a range of Eddy Current Rotary Probes available as well as the ability to design and manufacture Application specific Rotary Probes for you. With an in-house Probe Design Team, we are sure that we can provide you with the fastest and best
